Yokogawa SB301 New And Original Module Japan
Overview
The CS3000 software operates as a Windows 3.1 application. It cannot preempt other
applications or functions in Windows and, therefore, cannot guarantee a response
time to user input actions. Using other applications while controlling a drive with the
CS3000 software can tie up PC resources and cause drive commands to be delayed.
To prevent drive commands (run, stop, and jog) from unexpectedly executing, the
CS3000 software specifies a time-out period (approximately 2 seconds) when it
establishes a link with the drive. While the link is established, the CS3000 software
sends messages to the drive to validate the link. If a message fails to reach the drive
within the time-out period because program execution has been delayed, the drive
invalidates the link. If the link becomes invalid, the drive does not accept drive
commands. If the drive was running, it stops, and a serial fault is generated.
Before a drive control command is sent to the drive, the drive’s status is checked to
validate the link. If communication between the CS3000 software and the drive have
been interrupted and you have selected a drive command, the command is not sent
and a message is displayed.
The time-out period is also used by the Parameter Monitor and Download functions,
both of which could be running while the Drive Control Window is open. If the link
becomes invalid while these functions are running, a message will be displayed in the
Drive Control window before the link is re-established. When you select the Download
command while the Drive Control window is open, you cannot execute drive command
controls until the download is complete.
More Products
| SEA4D-11 | SCP451-11 | SAI143-S03 S1 |
| SEA4D-01 | SCP401-11 S1 | SAI143-H33 |
| SDV541-S33 | SCB110-S0 | SAI143-H03 |
| SDV541-S23 | SCB100-S0 | S9400UK S9129FA |
| SDV531-S33 | SB401-10 S1 | S9049PM |
| SDV531-S23 S1 | SB401 | RS-422/RS-485 |
| SDV531-S13 | SB301 | PW702 S1 |
| SDV531-L33 | SAV144-S33 | PW604 |
| SDV531-L23 | SAV144-S03 | PW602 |
| SDV521-S33 | SAI533-H33 | PW601 |
| SDV144-S33 | SAI533-H03 | PW502 S1 |
| SDV144-S13 S1 | SAI143-S33 | PW482-10 S2 |
You May Need
| ABB | Honeywell | GE Fanuc |
| ECC 086387-001 | 10024/1/1 | IC695PSA040 |
| 07 KT 97 07KT97 GJR5253000R0270 | TSAI-1620M | VMIVME-7750-746000 |
| 07 KT 98 07KT98 GJR5253100R0220 | TK-PRS021 | VMIVME-7671-421000 |
| 07AI91 WT91 GJR5251600R4202 | TK-PRR021 | VMIPCI-5565-110000 |
| 07BT62R1 | TK-PPD011 51309241-175 | VIPC616 |
| 07CR41-C12 | TK-PPD011 | V7768-320000 |
| 07DC91 | TK-OAV061 | URRHH |
| 07DC91 GJR5251400R0202 | TK-IOLI01 | UR9KH |
| 07DC92 | TK-FXX102 | UR9EH |
| 07DC92 GJR5251600R0202 | TK-FTEB01 | UR-8NH GE |
| 07DC92 GJR5252200R0101 | TK-FPDXX2 | UR8LH GE |
| 07DI92 | TDCS3000LCN | UR8HH |
Popular Searches
1.Allen-Bradley 1756/1769/1771/1785 Series
2.ABB 800xA/Bailey INFI90/DSQC Series
3.Bently Nevada 3500/3300 Monitoring System
4.Schneider Series Quantum 140 series
5.General Electric IC693/IC697/IC698/IS200/DS200 Series
6.SIEMENS MOORE/S5 Series
7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts
8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture
9.Honeywell TDC2000/TDC3000/Experion HS Series
10.YOKOGAWA CS3000 System
